Brug for hjælp?
info@in-vitro.dk
+45 4847 5070 (kl.8-16)

BeadBath Duo, 10L bath, including hinged lid

BE-B2410-E


Enhed: 1 STK
Steriliseret: Nej
Lager: Leveringstid 4 dage

BEADBATH DUO™

  • Two separate modes for BEADS or WATER
  • Quik-Cal™, simple in-lab calibration function
  • Offers all of the advantages of a “Bead Bath”
    • Eliminates constant refills (Burn-out protection)
    • Easy (accessory free) securing of tubes and bottles
    • Allows angled incubations
    • Runs constant (no wait for heat-up)

The BeadBath Duo series are the first laboratory baths designed for precision temperature control when used with water, or with (the increasingly popular) Lab Armor® thermal beads. Unlike any other laboratory bath, they feature a “MODE” button that can be used to toggle between “Bead” or “Water” mode. Choosing the correct mode will automatically adjust the operation and balance of the multiple internal heating and sensing elements to ensure optimal performance. The result is one combination bath that is suitable for accurate, and uniform temperature control in either condition.
While the majority of research laboratories today are using water baths, many prefer the convenience of bead baths due to the advantages listed below. With the BeadBath Duo, the lab gets the best of both worlds, allowing conversion from one bath type to the other, with the simple press of a button.

Temp. Range (Water): Ambient +5° to 80°C
Temp. Range (Bead): Ambient +5° to 70°C
Temperature Accuracy (2L/10L): +0.2°C
Temperature Increments (2L/10L): 1.0°C/0.1°C
Temp. Uniformity (Water): ± 0.2°C at 37°C
Temp. Uniformity (Bead): ± 0.9°C at 37°C
Exterior (WxDxH) (2L): 6.5 x 8 x 6 in
Exterior (WxDxH) (10L): 10.8 x 16 x 12 in
Chamber (WxDxH) (2L): 5.5 x 6 x 4 in
Chamber (WxDxH) (10L): 9.5 x 11.8 x 6.1 in
Weight (2L): 4.5 lbs/ 2.0 kg
Weight (10L): 15 lbs/ kg
Electrical: 115V or 230V 50-60Hz
Warranty: 2 Years

Kat.nr:: BE-B2410-E
Nettovægt i kg: 15.9
Steriliseret: Nej
Partnr.: B2410-E
Benchmark Scientific
Relaterede varer